Wieland Copper Alloys: Choosing Bronze Over Brass When It Matters
Bronze and brass differ in wear and corrosion. Tin makes bronze tough; zinc makes brass machineable. Choose the right Wieland copper alloy for each failure mode.
Read articleWhat Two Metals Make Up Bronze? Copper and Tin, Explained
Bronze is made of copper and tin, while brass uses zinc. Here's how that difference drives strength, corrosion resistance, and alloy choices.
Read articleChoosing Ferrous Metals for Magnetic Separators: A Decision Framework
Learn how to specify ferrous metals for magnetic separators: balance magnetic response, wear resistance, and lifecycle cost with a three-step decision rule.
Read articleThe Metals That Won't Stick to a Magnet: Choosing by Alloy Family
Aluminum, copper, brass, bronze, and austenitic stainless steel do not stick to magnets. Choose by alloy family and performance, not by magnetic response.
Read articleWhich Metals Does a Magnet Really Stick To?
Not all metals stick to magnets. Learn why iron, nickel, and cobalt attract, while aluminum, copper, brass, bronze, and most stainless steel do not.
Read articleWhat Two Metals Is Bronze Made Of? Copper and Tin, With a Practical Twist
Bronze is made of copper and tin, but the alloy ratio determines whether it suits a bearing or brass is cheaper. Learn the numbers.
Read articleWhich Metals Won't Stick to a Magnet? A Buyer's Guide to Non-Magnetic Metals
Learn which metals won't stick to a magnet — brass, bronze, copper, aluminum, and stainless — and how to choose the right non-magnetic metal for your project.
Read articleMagnet or Not: A Workshop Guide to Metal Sorting
Which metals stick to a magnet? Learn why carbon steel grabs, aluminum and brass don't, and stainless steel can go either way—plus a simple workshop test.
Read articleHow to Choose a Ferrous Metals Magnetic Separator Without Overpaying
Choosing a ferrous metals magnetic separator starts with feed identity, not gauss ratings. The right unit matches throughput, recovery, and total cost.
Read articleWhich Metals Refuse a Magnet? A Practical Selection Guide
Non-magnetic metals like aluminum, copper, and austenitic stainless are more than a magnet test; here's what matters when selecting them for real components.
Read article